Diagnostic Meter

Diagnostic Meter

How Infrared Theremometers Work:
To measure a surface temperature the user aims the IR Theremometer at the target, presses a button, and reads the temperature display. The device has an optical lens that colects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading. An infrared thermometer measures temperature by sensing the magnitude of radiated energy at infrared frequencies. Using this data and the actual temperature of the detector, the thermometer calculates the temperature of the surface that emitted the energy.

Features:

• SoC (System-on-a Chip) Technology-Complete IR design incorporated on a single chip, creating compact and lightweight design.
• Innovative optical lens- high accuracy measurements over wide temperature ranges. 10:1 distance to spot (D:S) ratios available.
• Laser pointer- Simply point at desired target and press the trigger for temperature reading.
• High and low pass filters with audible alarms for out of rage measurements
• Temperature modes - Maximum (MAX)
• Visual low battery indicators; requires two "AAA" batteries.
  

SPECIFICATIONS
Measurement Range	-76 to +932oF(-60 to +500oC)
Thermocouple Measurement Range	NA
Accuracy: Tobj=59o -95oF(15-35oC)	+-1.8oF(1.0oC)
Tamb =77oF(25oC)
Accuracy: Tobj= -27-932oF(-33-500oC)	+-% of reading or 4oF(2oC) whichever is greater
Tamb = 73oF+-5oF(23 +- 3oC)
Thermocouple Accuracy:	NA
Emissivity:	0.95 fixed
Resoultion : 14.2o F~199.9o F(-9.9~199.9o C)	0.1o F/0.1o C (1o below 9.9 and above 199.9)
Spectral Response	5~14 um
Response Time(90% )	.5sec
Distance:Spot:	10:1